Filter
Top Products
TROUBLESHOOTING 142
Faults Possible cause Action
Engine has too little power. Fuel filter very dirty – Have the fuel filter changed.
Defect in fuel injection system – Read the error memory with the KTM
diagnostics tool and correct the fault.
Engine overheats. Too little coolant in cooling system – Check the cooling system for leakage.
– Check the coolant level. ( P. 124)
Radiator fins very dirty – Clean radiator fins.
Foam formation in cooling system –
Drain the coolant.x ( P. 126)
–
Fill the cooling system.x ( P. 127)
Buckled or damaged radiator hose – Have the radiator hose changed.
Thermostat defective – Have thermostat checked.
Fuse5 blown – Change the fuses of individual power
consumers. ( P. 109)
Defect in radiator fan system – Have the radiator fan system checked.
Air in cooling system –
Fill the cooling system.x ( P. 127)
FIwarning lamp (MIL) lights/flashes Defect in fuel injection system – Read the error memory with the KTM
diagnostics tool and correct the fault.
Engine dies during the journey Lack of fuel – Fill up with fuel. ( P. 51)
Fuse1,2 or4 blown – Change the fuses of individual power
consumers. ( P. 109)
High oil consumption Engine vent hose bent – Route the vent hose without bends or
change it if necessary.
Engine oil level too high – Check the engine oil level. ( P. 133)
Engine oil too thin (low viscosity) – Change engine oil and oil filter, clean oil
screens.x ( P. 133)