Filter
Top Products
0
0
BB
0
0
AA
MAINTENANCE WORK ON CHASSIS AND ENGINE 118
– Press the new flasher bulb carefully into the holder and turn it clockwise as far as it will
go.
Flasher light(BA15s) ( P. 158)
– Mount the orange cap.
– Position the diffuser.
– Insert the screw and turn it first counterclockwise until you feel it click into the thread.
Tighten the screw.
– Check the flasher function.
9.61Checking headlamp setting
400408-10
– On a light-colored wall with a horizontal area in front of it, make a mark as high as the
center of the low beam headlight.
– Make another mark at a distance of under the first mark.
Specification
Distance 5cm (2in)
– Stand the motorcycle at a distance of in front of the wall and switch on the low
beam.
Specification
Distance 5m (16ft)
– Check the headlamp setting.
The boundary between light and dark must be exactly on the lower mark for a motor-
cycle with driver.
» If the boundary between light and dark does not meet specifications:
– Adjust the headlight range. ( P. 119)