Filter
Top Products
GREASING AND SERVICE TABLE 91
8GREASING ANDSERVICETABLE
8.1
Important service tasks to be carried out by an authorized KTM-RC8 workshop.
K10N K75A K150A J1A J2A
Engine
Change the engine oil and filter, clean the oil screen.x ( S. 185)
• • • • •
Check the valve clearance and adjust if necessary.x
•
Replace the spark plugs.x
•
Check the engine fixing screws and other engine screws accessible
from outside to ensure that they are tight.x
• • •
Check the clutch.x
•
Clean the oil jet for clutch lubrication.x
•
Fuel injection
Read out the status query and fault memory with KTMDIA.x
• • •
Check bellows for tears and leaks, and check the linkage of the throt-
tle valve spigot for freedom of movement.x
•
Check the cable harness of the throttle valve body for damage and cor-
rect routing.x
•
Check hoses of vacuum sensors, SLS hoses and vent hoses for dam-
age, correct routing and leaks.x
• • • • •
Check the fuel hose for damage, correct routing and leaks.x
• • • • •
Check fuel pressure.x
• •
Attachments
Check the cooling system for leaks.x
• • • • •
Check the water pump for leaks (visual check).x
• • •
Check the coolant level. ( S. 172) • • • • •
Check the antifreeze.x
• • • • •
Check the functioning of the radiator fan.x
• • •
Check the exhaust system for leaks and correct fitting and check that
the exhaust holders are tight.x
• • •