KTM 1190 RC8 FR Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 148
9.54Mounting helmet lock on vehicle
700336-01
Remove the seat. ( S. 146)
Position the steel cable from the toolset with one loop on the lug.
Steel cable (60012015000)
Guide the steel cable through the helmet opening.
Then position the free loop of the steel cable on the lug.
Position the helmet carefully on the side of the motorcycle.
Fit the seat. ( S. 146)
9.55Removing the batteryx
Warning
Risk of injuryBattery acid and battery gases cause serious cauterization.
Keep batteries out of the reach of children.
Wear suitable protective clothing and goggles.
Avoid contact with battery acid and battery gases.
Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a doctor.
Switch off all power-consuming components and switch off the engine.
Remove the seat. ( S. 146)