KTM 1190 RC8 FR Motorcycle User Manual


 
TIPS ON PUTTING INTO OPERATION 78
Info
When using your vehicle, remember that others may feel disturbed by excessive noise.
Make sure that the pre-delivery inspection work has been carried out exclusively by an authorized KTM-RC8 workshop.
You receive a delivery certificate and the service record at vehicle handover.
Before your first trip, read the entire operating instructions carefully.
Get to know the operating elements.
Adjust the basic position of clutch lever. ( S. 175)
Adjust the basic position of the handbrake lever. ( S. 129)
Adjust the footbrake pedal. ( S. 121)
Get used to handling the vehicle on an empty car park before making a longer trip. Try also to ride as slowly as possible to get a better
feeling for the motorcycle.
Hold the handlebar firmly with both hands and keep your feet on the footrests when riding.
Do not make any changes to the vehicle, and use only KTM approved/recommended parts.
Info
Parts from other manufacturers can reduce the operational safety of the vehicle.
Run the engine in. ( S. 78)
6.2Running the engine in
Do not exceed the specified engine speed and load during the running-in period.
Guideline
Maximum engine speed
During the first: 1,000km (621.4mi) 7,500rpm
After the first: 1,000km (621.4mi) 10,500rpm