Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 187
700287-01
– Stand the motorcycle on its side stand on a horizontal surface.
– Place a suitable container under the engine.
– Remove the oil drain plug with the magnet, O-rings and oil screen.
–
Remove the oil filter.x ( S. 188)
– Completely drain the engine oil.
700292-01
– Thoroughly clean the magnet and oil screen of the oil drain plug.
700288-01
– Fit and tighten the oil drain plug with the magnet, O-rings and oil screen.
Guideline
Oil drain plug M20x1.5 20Nm (14.8lbfft)
–
Fit the oil filter.x ( S. 190)