Kenwood KNA-DV2100 GPS Receiver User Manual


 
Warning Messages
For safe use please observe the following !!!
READ
THIS MANUAL FIRST.
Read this manual carefully before operating the Kenwood Car Navigation System and follow the
manual's instructions. Kenwood is not liable for problems or accidents resulting from failure to
observe the instructions in this manual.
OBSERVE LOCAL TRAFFIC SIGNS AND REGULATIONS.
Always observe the local traffic signs and regulations while driving and check them against
the system's instructions.
Due to frequent changes in local signs and regulations, the traffic sign
and regulation data on the Map DVD-ROM may be outdated. Furthermore the Map DVD-ROM
cannot reckon with certain conditions such as traffic density at certain times of the day,
(temporary) road closures due to construction work, weather conditions or special events taking
place. Furthermore, some of the roads (usually minor roads) in the map do not include the data on
traffic control and restrictions.
Therefore always obey the local traffic signs and regulations, if
they conflict with the system's instructions. Failure to do so may place you in illegal,
unsafe or dangerous situations.
DRIVE SAFELY.
Before following the system's guidance instructions, such as changes in direction, always
check first whether it is safe to do so given the current traffic conditions.
Then follow the
given instructions, but make sure you do so in a safe manner.
VOLUME LEVEL.
keep the system's volume at a low enough level to be able to hear outside noises while driving. If
you can no longer hear outside noises, you may be unable to react adequately to the traffic
situation. This may cause accidents.
FOREIGN OBJECTS.
To prevent accidents, keep fingers and foreign object out of the disc-loading slot. If a foreign
object is inserted inside the unit, or if it emits smoke or a noxious odor, stop operation
immediately and contact the closest Kenwood dealer.
STOP OPERATION IN THE EVENT OF PROBLEMS.
In event of problems such as a lack of sound or video, stop operation
and push the reset button. Should the problems persist, stop
operation of the system and contact the closest Kenwood dealer.
NEVER DISASSEMBLE OR ALTER.
Never try to disassemble or alter the unit. Any attempt to do so will void the warranty and may
cause accidents, fire or electric shock.
REPLACING FUSES.
When replacing fuses always use the same tape and rated ampere. Failure to do so may cause
fire.
SMALL ARTICLES.
Keep small articles (like screws or batteries) out of the reach of children. If any such object is
accidentally swallowed, consult a doctor immediately.
Information in this document is subject to change without notice
DV2100_Warning_Eng_ver2_4E 01.8.6 11:49 AM Page 1