Kenwood DDX7036BT GPS Receiver User Manual


 
DDX series DDX8036BT/ DDX8036BTM/ DDX7036BT/ DDX7036BTM
English
65
Next page 3Next page 3
• Only the adjusted distance of position setup
(Position and Position DTA values) is stored in
memory. Therefore, the final adjustment distance
changes if you change the Car Type Set Up value
(page 84).
Position DTA Control
You can fine-adjust your listening position.
1 Display the Position DTA screen
2 Select a speaker you wish to adjust
3
3
3
2
2
2
1
1
1
6
6
6
4
4
4
1 Center speaker (DDX8 series)
2 Left front speaker
3 Right front speaker
4 Left rear speaker
5 Right rear speaker
6 Subwoofer
[2], [3] Finely adjusts the value set with
the Position function.
[Total DTA] Indicates setup distance.
The adjusted distance (Position and
Position DTA values), and the total
of the distance adjusted by Car Type
Set Up (page 84) and the adjustment
distance for position setup are
indicated.
3 Finely adjust the distance
Finely adjust the value set with the
Position function.
SRS WOW Control (DDX8 series) SRS WOW Control (DDX8 series)
You can set up the SRS WOW effect.
1 Display the SRS WOW Control screen
Touch [
] > > [ ] > > [SRS WOW].
(page 61)
2 Set the SRS WOW Control
1
1
1
1 Selects SRS WOW setting.
SRS WOW User Setup
1 Display the SRS WOW Adjust screen
2 Adjust the SRS settings
1
1
1
1 Selects a speaker to be set (Front,
Rear or Center speaker).
[TruBass] Sets the TruBass effect level.
[FOCUS] Sets the FOCUS effect level.
[SRS 3D] Sets the SRS 3D effect level.