Kenwood DDX6034M GPS Receiver User Manual


 
68 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Setup Menu
Select the Bluetooth unit to register4
1
1
1
1 Displays the searched Bluetooth unit.
[Search] Searches for a Bluetooth unit.
[Cancel] Cancels searching of Bluetooth unit.
Enter PIN code 5
1
1
1
1 Enters a code number.
[Enter] Enter the PIN code specified for the
Bluetooth unit to register.
This button will not be active until at least four
PIN code digits have been entered.
[Cancel] Cancels registration of PIN code.
[Clear] Clears the code number.
You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 69).
If the error message appears even though the PIN code is
correct, try <Registering Special Bluetooth Unit>.
Registering Special Bluetooth Unit
Registers Special Bluetooth unit that results in
error by normal operation by selecting from
model name.
Display the Special Device List screen1
Select a model name2
Displays the Bluetooth unit name that can be
registered.
Confirm whether to register3
Only models in Bluetooth unit name list can be
registered.
Go through the procedure of <Registering 4
Bluetooth Unit> and complete the
registration (pairing).