Kenwood DDX6034M GPS Receiver User Manual


 
50 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Hands Free Unit Control
Utter the voice to register (2nd try)5
Utter within 2 seconds after the Beep.
End voice registration6
A message is displayed if the voice is not recognized.
Read the message for the further operation.
Repeat from 1st try if the voice is different from the 1st
try.
Key Word Voice Registration
Registers the voice to select the Phone number
category by Voice Recognition.
Display the Hands Free Setup screen1
See <Setting Up the Hands-Free Phone> (page
48).
Display the Key Word List screen2
Select the Phone number category to 3
register
1
1
1
1 Selects the Phone number category.
"REC" turns on for data with voice for voice
recognition already registered.
[Record] Registers voice for the selected
Phone number category.
[Play] Plays voice registered for the selected
Phone number category.
[Delete] Deletes voice registered for the
selected Phone number category. Touch to
display the confirmation screen. Touch [Yes] to
delete or [No] to cancel.
Display voice registration screen4
Utter the voice to register (1st try) 5
Utter within 2 seconds after the Beep.
Utter the voice to register (2nd try) 6
Utter within 2 seconds after the Beep.
End voice registration 7
A message is displayed if the voice is not recognized.
Read the message for the further operation.
Repeat from 1st try if the voice is different from the 1st
try.