Filter
Top Products
PREPARA
TION 11
A. Seat
B. Seat Lock
C. Ignition Key
D. Insert
•
Turn the key clockwise while pulling the rear
end of the seat.
•
Remove the seat backward.
•
Run the suitable band into the positive termi-
nal (+).
•
Pull the battery out of the battery case with
both hands.
A. Battery
B. Suitable Band
•
Clean the terminals.
Battery Specifications
Make Furukawa
Battery Type FTX12-BS
Battery Capacity 12 V 10 Ah
Electrolyte Capacity 0.60 L
Battery/Electrolyte Set P/No. 26012-0109
Battery Activation
Fillin
g the Battery with Electrolyte
CAUTION
Do not remove the aluminum sealing
sheet [A] from the filler ports [B] until
just prior to use. Be sure to use the ded-
icated electrolyte container for correct
electrolyte volume.
•
Place the battery on a level surface.
•
Check to see that the sealing sheet [A] has no
peel
ing, tears, or holes in it.
•
Remove the sealing sheet [A].
NOTE
żThe battery is vacuum sealed. If the sealing
sheet has leaked air into the battery, it may
require a longer initial charge.
•
Remove the electrolyte container from the
vinyl bag.
•
Detach the strip of caps [A] from the container
and set aside, these will be used later to seal
the battery.
NOTE
żD
o not pierce or otherwise open the sealed
cells [B] of the electrolyte container. Do not
attempt to separate individual cells.