Filter
Top Products
Installation Instructions
OUO6050,0000A4C –19–25MAY07–1/1
Installation of the AutoTrac Universal system
Installation involves the following steps:
1. Remove the Steering Wheel.
2. Attach Bushing
3. Attach Anti-Rotational Device
4. Attach AutoTrac Universal Steering Wheel to
Steering Shaft
5. Attach AutoTrac Universal Harness to AutoTrac
Universal Steering Wheel
6. Europe Only—Attach On/Off Switch
7. Attach AutoTrac Universal Harness to GreenStar
Harness
8. Attach Seat Switch Harness—if applicable
9. Route and Secure All Harnesses
10. Activate AutoTrac Universal
11. Setup System
OUO6050,0000A4D –19–25MAY07–1/1
Remove Steering Wheel
PC8716 –UN–08SEP05
A—Locking Washer
B—Lock Nut
C—Telescoping Washers
D—Nut
The steering wheel should be removed following the
process set by the manufacturer of the machine. The
hardware shown is specific to John Deere tractors.
Depending on the machine, the hardware attaching the
steering wheel may be different. Save hardware and use it
to attach the AutoTrac Universal Steering Wheel. Save
original steering wheel to use if AutoTrac Universal is
removed from machine.
PC20864 (05JUL07) 3 Installation Instructions
070507
PN=5