John Deere PC20864 Automobile Parts User Manual


 
Installation Instructions
OUO6050,0000A80 –19–05JUL07–3/3
3. Re-assemble plastic switch enclosure and use hole
where switch was as a guide for making hole in next
step.
4. Create the panel mount hole if not already created
(22mm X 36.8mm rectangular hole).
5. Insert the switch into the panel mount.
NOTE: This may require disconnecting the harness from
the switch.
6. Connect the harness to the ATU harness at the 9-Pin
round connector.
7. Test switch functionality using the ATU diagnostic
screens to ensure proper operation.
PC20864 (05JUL07)
19
Installation Instructions
070507
PN=21