Filter
Top Products
ASSEMBLY
6
7
• Fit the steering wheel cap into the center of the steering wheel.
Make sure the screw holes are aligned.
• Insert two #8 x 1" screws into the holes in the steering wheel
cap and tighten.
• Position the vehicle on its side.
• Fit a
3
/
16
"
lock nut onto the end of the steering column.
• While supporting the steering column tighten the lock nut with
the assembly tool.
• Turn the vehicle upright.
Lock Nut
5
Steering Wheel
Steering Wheel Cap
BOTTOM VIEW
• Using safety scissors, separate the activity panel and the instru-
ment panel. Dispose of the plastic connector.
• Insert and
"snap" the base of the shifter into the activity panel.
Activity
Panel
Shifter
Instrument Panel
8
• Fit the tabs on the bottom of the instrument panel into the notch-
es in the dash opening to the left side of the steering wheel.
• Press near the top of the instrument panel to
"snap" in place.
9
N9356pr-0920