Filter
Top Products
1
Charger Connector
2
BATTERY CHARGING
Battery Connector
• Plug the battery connector into the charger connector.
IMPORTANT! If you are recharging your battery, you will first
need to lift the hood and remove the battery retainer (pretend
engine cover). Disconnect the battery connector from the motor
harness connector.
• Plug the charger into a standard wall outlet.
Note:
Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet. If power flow to the wall outlet is controlled
by a switch, make sure
the switch is ON.
The power indicator on
the charger does not indicate the charge status of your battery.
The power indicator allows you to see that there is power from the
wall outlet.
•
Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the wall
outlet. The battery is now ready to be installed in your vehicle.
Please see the Battery Installation section on page 13 for detailed
instructions on installing your battery.
Battery Connector
7
N9356pr-0920