Filter
Top Products
03524832_ed13 5
150BMG Series Air and Gas Starters Dimensional Drawing
3/8 -18 NPT Lube
connection
18.03
12.34
3.56
3.25
2.00
Cover
Motor
Housing
8.69
2.46
Gear Case
Drive
Housing
3.25
4.44
72˚30’
120˚
120˚
R 2.359
Right Hand or
Clockwise Rotation
Left Hand or
Counter Clockwise
Rotation
6.0
Ø 5.25
Ø 3.
62
4
Ø 4.718
R 1.25
1 1/4 -11 1/2 NPT Inlet
1 1/4 -11 1/2 NPT
Exhaust
4 Capscrews
Motor Housing may be rotated
to any one of 4 Angular positions
to provide Engine Clearance
12 Capscrews
Drive Housing may be rotated
to any one of 18 Angular positions
to provide Engine Clearance
(Dwg. TPA1441)
Std Tolerances unless otherwise specied
.xx = ±.010
.xxx = ±.005
xº = ±.5º
Notes:
1. Starters should be installed on the Engine with the exhaust pointed down.
2. Use the set of control ports on the upper side of the Drive Housing.
(Only Drive Housings with two sets of Control Ports)
3. Drive Housing Orientation code is based on Position of mounting hole opposite the Pinion Opening.
4. Please read the instructions before attempting to reorient.
5. Starter wieght: 38lbs (17.5 kg)
6. Lubricator and Muffler Included.
1.
Orientation Options
Cover Motor Housing Gear Case Drive Housing
4 @90º 4 @90º 4 @90º 18 @ 20º
2.
Performance Data @ 120 psi
“E” Ratio 108 146 21.3 1740
Model
ft/lbs Nm
MAX HP @ RPM
MAX TORQUE
3. These Models available Gas Sealed. Identify with a “G” in the Model, Example: 150BMGE21RH-6
4. These Models have 4-Bolt Mounting Flange (Drive Housing 9BM-300-4)
5. This Model has SAE No. 1 Mounting Flange (Drive Housing 10BM-300-1)
6. Any previously published model not listed at right will require price and delivery quotation.
* PD for Lay Out Purpose
Normally Available Models
Model
Drive Number Pinion Data
IR Facet No. of Teeth Blank Size DP PD* PA
(3) (5) 150BME12RH-13 9BM-299-9 A-3400 13 8/10 1.625 20º
150BME22LH-8 9BM-299-4 A-3242 13 8/10 1.625 20º
(4) 150BME23RH-12 10BM-299-21 A-3233 11 6/8 2.000 20º
(4) 150BME24RH-19 10BM-299-22 A-3344 12 8/10 1.625 20º
Price and Delivery must be conrmed on above models
(3) 150BME22RH-5 10BM-299-22 A-3344 12 13 8/10 1.625 20º
150BME21RH-31 10BM-299-21 A-3233 11 12 6/8 2.000 20º
(3) 150BME21LH-11 10BM-299-19 A-3238 11 12 6/8 2.000 20º
(3) 150BME21RH-6 10BM-299-21 A-3233 11 12 6/8 2.000 20º
150BMC21RH-39 Replace with 150BME21RH-6
150BMC22RH-38 Replace with 150BME22RH-5
150BME21LH-37 Replace with 150BME21LH-11