Filter
Top Products
36
Programming a Destination
There are several methods you can use to program your Navigation system to
guide you to a desired destination point. Two of the most common destination
programming methods are provided here.
Refer to Setting a destination in the INFINITI Navigation Owner’s Manual for additional available
methods. Note: The vehicle must be stationary before performing destination programming.
Programming a Destination – Street Address
1 Press the
button.
2 Highlight Street Address, then
press ENTER.
3 Input the House Number by
highlighting each character and
pressing ENTER.
4 Once complete, highlight OK, then
press ENTER.
5 Input the Street Name by
highlighting each character and
pressing ENTER.
6 Once complete, highlight List, then
press ENTER.
7 Highlight the correct street and city
from the list, then press ENTER.
8 Highlight Start, then press ENTER
to set the destination, calculate the
route, and begin route guidance.
Programming a Destination – Points of Interest
1 Press the
button.
2 Highlight Points of Interest, then
press ENTER.
3 Highlight a main category (e.g.,
Restaurant, Shopping, Travel, etc.),
then press ENTER.
Note: Depending on the category, you may be
prompted to make additional selections.
4 Highlight a POI subcategory (Nearby POI,
By Name, or By City), then press ENTER.
5 Highlight the desired selection from
the list, or enter the name of the
destination, then press ENTER.
6 Highlight Start, then press ENTER to set the destination, calculate the
route, and begin route guidance.
Note: For a comprehensive Category list, refer to Setting a destination in the INFINITI Navigation
System Owner’s Manual for more information.