Infiniti M45 Automobile User Manual


 
NAVIGATION CONVENIENCEGETTING STARTED DRIVING CONTROLS MEDIA CENTER COMFORT
comfort
31
To Control Fan Speed:
1 Press the Fan Speed Control buttons + or to manually
adjust fan speed UP or DOWN. The fan speed indicator on
the Control Panel Display screen will change as fan speed is
increased/decreased. The mode will change from AUTO to
MANUAL mode (“AUTO” no longer appears on the screen).
2 Press the AUTO button to return to automatic control of fan speed.
To Turn ON Air Conditioning:
Press the A/C button. The indicator light on the A/C button will illuminate.
To Turn ON Heat:
1 Press the A/C button until the indicator light on the A/C button
turns OFF.
2 Press UP or DOWN on the DRIVER Temperature button (in AUTO
mode) or the PASSENGER Temperature button (in DUAL mode) to
increase or decrease the cabin temperature.
Note: For optimum system operation, DO NOT set the inside cabin temperature lower than
the outside air temperature.
To Choose Fresh or Recirculated Air:
Press the Fresh Air/Air Recirculation (Intake Air Control) button to
select between:
N Fresh (outside) air for cooling/heating/defrosting. The
indicator light on the left side of the Intake Air Control button will
illuminate and Fresh Air will briefly display on the Control Panel
Display screen when fresh air is selected.
N Recirculated (inside) air for maximum A/C cooling performance
and to prevent unwanted outside odors from entering the
vehicle. The indicator
light on the right side of the Intake
Air Control button will illuminate and Recirculation will briefly
display on the Control Panel Display screen when recirculated air
is selected.
Notes:
N Recirculated Air mode cannot be activated when the system is set to A/C and the
Front Defroster is ON.
N Extended use of recirculated air may cause the inside of the windows to fog up.
N While in AUTO mode, intake air is also controlled automatically. To manually control
intake air while in AUTO mode, press the Intake Air Control button. To return to
Automatic Control mode, press and hold down the Intake Air Control button for
approximately 2 seconds. Both indicator lights on the button will flash twice. Intake
air will once again be automatically controlled.
AUTO
A/C
+
-
A/C
TEMP