Filter
Top Products
English-49
MAINTENANCE
To adjust anti-scalp rollers
Anti-scalp rollers are properly adjusted when
they are just slightly off of the ground when
the deck is at the desired cutting height in the
operating position. Anti-scalp rollers then
keep the deck in the proper position to help
prevent scalping in most terrain conditions.
Tunnel Deck -
The anti-scalp rollers can be set in three
positions:
• Upper position 1.5” to 3”/38 to 76 mm
grass.
• Middle position 3” to 4.5”/76 to 114 mm
grass..
• Lower position 4.5” to 6”/114 to 152 mm
grass.
Combi Deck -
• Upper position 3” to 4.5” (76 to 114mm)
grass.
• Lower position 4.5” to 6” (114 to 152mm)
grass.
The rollers should be approximately 1/4”/6.5
mm from ground. Do not adjust the rollers to
support the deck.
CZ-9
Anti-scalp roller - Tunnel Decks
IMPORTANT INFORMATION
Adjust Anti-scalp rollers with the
mower on a flat level surface.
CZ-9
Anti-scalp roller - Combi Decks
IMPORTANT INFORMATION
The anti-scalp rollers must not be used for
gauge wheels or the roller and deck may
be damaged.