Filter
Top Products
English-
16
CONTROLS
Controls
This operator’s manual describes the
Husqvarna Zero Turn Rider. The rider is fitted
with a Kawasaki four-stroke V-Twin engine
developing 25 horse power.
Transmission from the engine is made via two
belt-driven hydrostat transaxles, which in turn
drive a hydraulic motor for each drive wheel.
Using the left and right steering controls, the
flow is regulated and thereby the direction
and speed.
Control Locations
Page Page
1. Motion control, levers 17 8. Seat locking device 20
2. Hour meter 18 9. Fuel tank cap 20
3. Tracking knob 18 10. Fuel shut off valve 21
4. Parking brake 18 11. Seat adjustment lever 21
5. Blade-switch 19 12. Choke control 21
6. Ignition switch 19 13. Throttle control 22
7. Fuses 19 14. Cutting height adjuster 22
8011-464
Zero Turn Rider
8011-767
Locations of the controls