Filter
Top Products
Model Identication
MODEL IDENTIFICATION
The serial number of each vehicle is printed on a bar code decal mounted either below the passenger side cup holder
or above the accelerator or brake pedal (Example: PH0901-583947) (Figure 6).
The two letters (1) at the beginning of the serial number indicate the vehicle model. The following four digits (2)
indicate the model year and production week during which the vehicle was built. The six digits (3) following the hyphen
represent the unique sequential number assigned to each vehicle built within a given model year. See following NOTE.
NOTE: Have the vehicle serial number available when ordering parts or making inquiries.
Build Code: The build code (4) is a ve-digit number that appears on the vehicle serial number decal. The build code
exists to enable the user to identify the correct owner’s manual for a vehicle. This owner’s manual is valid for the build
code range indicated on the back cover of this owner’s manual.
PH0901-123456
BC54679
SERIAL NUMBER
4
1
2
3
1400
Figure 6 Serial Number Decal
CONTROLS AND INDICATORS
See General Warnings on page 8.
WARNING
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and
operating procedures.
• Do not tamper with the high idle speed setting on the diesel vehicle. Doing so will void the warranty,
as well as damage the engine and other components, and could result in property damage, personal
injury, or death due to unsafe speeds.
• Do not shift the Forward/Reverse handle while the vehicle is in motion.
• Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result in
injury to inattentive passengers and (or) damage to the vehicle.
• To avoid unintentionally starting or rolling the vehicle, set the park brake, place the Forward/Reverse
handle in the NEUTRAL position, turn the key switch to the OFF position, and remove the key when
leaving the vehicle.
Page 12 HUV 5420 DX All-Wheel Drive CE Mark Diesel Vehicle Owner’s Manual