Filter
Top Products
To Order a New Pump:
313597E 3
To Order a New Pump:
NOTE: Do not configure and order a pump using only
this manual. Work with your Graco distributor or follow
the steps below.
1. Go to www.gracohusky.com.
2. Click on Toolbox in the gray banner near the top.
3. Click on the Husky 1050 Pump Selector, your
choice of either the download version or the online
version.
4. Click on Pump Selector in the blue banner. Use the
Selector Tool to configure your new pump.
To Order Parts for Your Existing Pump
1. Check the identification plate (ID) for the 20-digit
Configuration Number of your pump.
2. Use the Configuration Number Matrix on the next
page to understand which parts are described by
each digit.
3. Refer to Parts Manual 313435 for the necessary
part numbers.