Filter
Top Products
12
© 2005 Directed Electronics—all rights reserved
2.
KKeeyy..
Turn the ignition to the ON position.
The parking lights will turn On.
3.
PPrrooggrraamm MMooddee..
Press and hold the program button on the
control module. The parking lights will flash Off and then
back On to acknowledge program mode.
4.
PPrrooggrraammmmiinngg..
Press and hold button on the transmitter.
The parking lights will flash Off and then back On to
acknowledge transmitter programming.
To add additional transmitters (within 10-seconds of the first
transmitter) Press and hold button on the additional transmitter.
ccooddee hhooppppiinngg
®®
rree--ssyynncchhrroonniizzee
If the transmitter is pressed many times out of range, or the
battery is removed, the transmitter may get temporarily out of
sync and fail to operate the system. To synchronize the trans-
mitter, simply press or several times within range of the
vehicle. The system will automatically synchronize and the trans-
mitter will respond normally.