Filter
Top Products
10
© 2005 Directed Electronics—all rights reserved
■ The brake pedal is pressed.
■ The hood is opened.
■ The shutdown toggle switch is put into the ON position.
■ Press the and buttons twice simultaneously on the
transmitter.
ppiitt ssttoopp mmooddee
This feature allows you to exit the car and leave the engine
running. Use the following procedure to
eenntteerr
Pit Stop Mode:
1. Place the transmission in park and put the parking brake on.
2. Leave the engine running.
3. Do not step on the brake.
4. Press the button twice or activation input twice (see
your installer regarding activation input). The parking lights will
flash once to confirm pit stop mode and the doors will unlock if
ignition controlled locking is programmed on.
5. Turn the key off and remove the key.
nnoottee::
The stop button does not affect the 3-hour time
interval between engine starts. If the engine fails to start
on 3 attempts it is counted as one start in timer mode.
The system will attempt to start again 3-hours later (if
this wasn’t its 6th start attempt).