Filter
Top Products
13
© 2005 directed electronics, inc.
3. Select a feature: Within 5-seconds
press and hold the Valet
®
switch. After 3-
seconds the horn will sound once to indi-
cate entry into the features menu. Release
the Valet
®
switch. Within 5-seconds press and release the
Valet
®
switch the number of times corresponding to the
desired feature listed earlier. Then press and hold the Valet
®
switch one more time and hold. The horn will sound the
number of times equal to the feature number selected.
4. Program the feature: While holding
the Valet
®
switch, assign the selected fea-
ture to the factory keyless transmitter but-
ton by either pressing Lock for a 1 chirp set-
ting or pressing Unlock for a 2 chirp setting.
Once the feature is programmed another feature can be programmed
or the learn routine can be exited.
after the feature is programmed
• Other features can be programmed.
• The Programming Mode can be exited if programming is
complete.
to access another feature
Press and release the Valet
®
switch the number of times necessary to
advance from the feature you just programmed to the next one you
want to program. Then press the Valet
®
switch once more and hold it.
For example, if you just programmed the second feature and you
would like to program the seventh feature in the menu, you would:
nnoottee::
The features that have more than two possible settings are
selected by pressing unlock to toggle through all the possible set-
tings.