Filter
Top Products
11
© 2005 directed electronics, inc.
programming options
Programming options control your system's normal, operational set-up.
Most options do not require additional parts, but some may require
installation labor.
programming settings
The following is a list of the program settings:
1.
AAccttiivvee
or passive arming (automatic arming 30-seconds after
closing the last door).
2. Arming/disarming confirmation chirps
oonn
or off.
3. Door Trigger Error Chirp
oonn
or off.
4. Ignition-controlled domelight
oonn
or off.
5.
PPaanniicc
/Auxiliary Channel: This unit has the ability to control
an optional accessory by pressing the door lock button twice.
If the auxiliary feature is activated and optional accessories
are not installed, the system will not respond to pressing the
lock button twice. In
ppaanniicc
mode pressing the lock button
twice will activate panic mode.
6.
AAuuxxiilliiaarryy OOuuttppuutt
or Delayed Auxiliary Output (Installer only).
7. Door Trigger
ddeellaayyeedd
or instant: In the
ddeellaayyeedd
configuration
the unit will provide a progressive response if the door is
opened while the system is armed. The system will chirp and
nnoottee::
Settings 6 and 11 are to be set by the installer.
nnoottee::
Factory default setting is shown in
bboolldd
.