Honeywell VX9 Automobile Parts User Manual


 
Connect Antenna
Several antenna configurations are available for the Thor VX9. Options include:
l single 802.11 external antenna
l dual 802.11 external antennas
l remote vehicle mount 802.11 antennas
l remote mount WAN antenna
l external Bluetooth antenna
The VX9 has up to three antenna connectors.
l Generally, the two top antenna connectors are used for the 802.11 antennas.
l The bottom connector is used for the Bluetooth antenna or the remote WAN antenna.
l If the VX9 has Bluetooth and WAN, only a single 802.11 antenna is supported.
Note: Thor VX9’s are equipped with a radio and require an antenna. Some Thor VX9’s may be equipped with a dual antenna
option. For these Thor VX9’s, an external antenna must be connected to each antenna connector.
External Antenna
The external 802.11 and Bluetooth antennas are pre-installed.
To use a remote mount 802.11 antenna, unscrew the pre-installed antenna to remove and follow these instructions.
Repeat for second 802.11 antenna connector, if present.
Note: Substitution of antennas is not permitted unless authorized by Honeywell. Use of unauthorized antennas will void the
FCC emissions certification of the Thor VX9.
3-4