Filter
Top Products
Mounting Dimensions
A. 2.56” (65.02 mm)
B. 1.84” (46.74 mm) Varies depending on bolt length
(Not To Scale)
RAM Plate Mount
1. Determine the position for mounting the RAM ball plate. Be sure to position the RAM plate to allow access to the
switches and ports on the bottom of the Thor VX9.
2. Attach the RAM ball plate to the vehicle mounting surface using four or six (depending on plate type) 1/4 bolts (or
equivalent) fasteners.
3. If not already attached, attach the RAM ball(s) to the RAM ball plate.
Note: 1/4 bolts not included.
IMPORTANT: Mount to the most rigid surface available.
2-6