Honeywell ML6195 Automobile Parts User Manual


 
ML6195, ML6295 SPRING RETURN DIRECT COUPLED ACTUATORS
63-2537—1
2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Logistics
Honeywell Inc., 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386 (612) 951-1000
In Canada—Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
Models:
ML6195A: Spring Return DCA, high torque (142 lb-in.
[16 N•m]), without auxiliary switches.
ML6295C: Spring Return DCA, high torque (142 lb-in.
[16 N•m]), with feedback potentiometer and two
adjustable line-voltage auxiliary switches.
Electrical Ratings:
Power Input: 24 Vac +20%, -15%, 50/60 Hz.
Power Consumption:
Running: 8 VA.
Holding: 5 VA.
Feedback Resistor (ML6295 Only):
1000 ohm linear potentiometer.
Cable Ratings:
Control: Standard models include non-plenum, UL/CSA
rated 30V, 140°F (60°C), 18-gauge color coded wires.
Auxiliary Switch: UL/CSR rated 300V, 194°F (90°C),
18-gauge color coded wires.
Integral connections for 3/8 in. flexible conduit.
Controller Type:
Floating, spdt (Series 60).
Torque Rating (at rated voltage):
Lift and Hold: 142 lb-in. (16 N•m).
Spring Return: 142 lb-in. (16 N•m).
Stall Maximum: 354 lb-in. (40 N•m).
Actuator Stroke:
95° ±2° , mechanically limited.
Actuator Timing:
90° Stroke: 90 seconds.
Spring Return: 15 seconds.
Ambient Temperature Rating:
-25°F to +130°F (-32°C to +55°C).
Storage Temperature:
-25°F to +158°F (-32°C to +70°C).
Humidity:
5 to 95 percent relative humidity, noncondensing.
Mounting:
Mounts directly on a 3/8 in. to 1 in. (9 to 25 mm) round or
1/4 in. to 3/4 in. (6 to 18 mm) square shaft.
Minimum shaft length required is 3/4 in. (20 mm).
Mounting bracket is included.
Dimensions:
See Fig. 1.
Device Weight:
4.85 lb (2.2 kg)
Noise Rating:
Maximum: 45 dBA at 1m
Direction of Spring Return:
Field-selectable.
Position Indicator:
Mounted on shaft coupling.
Actuator Design Life (Full Stroke Cycles):
Minimum: 50,000.
Repositions:
20% Load: 5,000,000.
Full Load: 1,500,000.
Approvals:
UL873.
CUL (CSA C22.2 No. 24-93).
Environmental Protection Ratings:
NEMA1.
Auxiliary Switches (ML6295C only):
Ratings:
24-240 Vac.
Resistive: 6A maximum.
AFL: 2A maximum.
Setting interval: 5°.
Switching hysteresis: 2°.
Accessories:
210033 Frame mounting kit.
210034 Foot mounting kit.
210035 1.06 in. U-bolt coupling.