Filter
Top Products
Installing the Charger Connecting Batteries to the Charger
6
CHG-120 Instruction 11/22/04 PN: 52459:A FCI P/N:9000-0572
Connecting Batteries to the Charger
Overview you can connect 25 AH –120 AH batteries to the charger. This section provides
illustrations and instructions for connecting two batteries or for connecting four batteries.
Connecting Two Batteries Figure 5 shows how to connect two 25 AH batteries to the
charger:
Figure 5 Connecting 25 AH Batteries
Table 3 contains instructions for connecting batteries to the charger:
Warning: Do not
connect the Battery
Interconnect Cable
at this time.
Refer to “Starting the
Charger” on page 15.
!
Power Supply
CHG-120
TB2
TB1
Step Action
1 Remove all power sources to the charger.
2 Connect the battery negative cable to the TB2 terminal (on the charger
labeled “Battery –” as shown in Figure 5.
3 Connect the battery positive cable to the TB2 terminal (on the charger)
labeled “Battery +” as shown in Figure 5.
4 Proceed to the section “Connecting the Charger.” Do not connect the Battery
Interconnect Cable at this time—refer to “Starting the Charger” on page 15.
Table 3 Connecting 25 AH Batteries