Filter
Top Products
7
4. Enter the user name <handheld> and default login password
<handheld> to log into network.
5. Enter choice 3 (Express Setup) and enter the configuration
information requested at each prompt.
6. Press OFF on the power adapter and reconnect the Ethernet cable.
7. Press ON on the power adapter. The Net Base boots up using the
configuration information entered in Step 5.
Accessing the Net Base Through a Browser
When the Net Base is powered on, connected to the workstation, and
you have obtained its IP address, you can access the Net Base through
your internet browser.
1. Open your internet browser.
2. In the Address line, type the IP address assigned to the Net Base
and press ENTER.
3. The login screen appears showing the Current Values.
4. Enter the Username and Password and click Log On.
***********************************************
* Welcome to the Honeywell Net Base *
***********************************************
SD00032Login: handheld
Password: ********
1) View System Configuration
2) View Current Values
3) Express Setup
4) Advanced Setup
5) System Statistics
6) System Diagnostics
7) Help
x) Exit
Enter choice: 3