Filter
Top Products
9
Mounting Options
The bottom panel offers two mounting options:
1. a DIN Rail for desk mounting or
2. a wall mount kit for wall mounting.
Both the DIN Rail and wall mount kits need to be purchased separately.
Using the DIN Rail
Use a standard 7.5mm high X 35mm wide DIN Rail to mount the Net
Base to a horizontal surface, such as a desk or table.
Installation Hardware
Screw: 3/16 in. dia x 5/8 in. long pan head screw
Washer: 1/2 in. OD x 7/32 in. ID x 3/64 in. thick
Nut: 3/16 in. dia
1. Slide the DIN Rail into the slot on the bottom panel.
2. Turn the Net Base and DIN Rail right side up.
3. Secure the DIN Rail to the horizontal mounting surface.