Filter
Top Products
64
Setting the WAAS/EGNOS
To enable/disable the WAAS/EGNOS feature:
1. Press the Menu button twice to display the main
menu.
2. Select Sys. Settings and press OK.
3. Select the Set 2 tab using the left/right navigation
keys.
4. Use the up/down navigation keys to highlight the
WAAS/EGNOS option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select On/Off.
7. Use the up/down navigation keys to highlight √ and press OK.
Setting the Backlight
The backlight can be set to always remain on, or turn off after 30 seconds,
3 minutes, or 10 minutes. The more you use the Backlight, the faster the
batteries will drain. When the Backlight goes out, press any key to turn it
on again.
To set the Backlight:
1. Press the Menu button twice to display the main
menu.
2. Select Sys. Settings and press OK.
3. Select the Set 3 tab using the left/right
navigation keys.
4. Use the up/down navigation keys to highlight the
Backlight option.
5. Press OK to display the available settings.
6. Use the up/down navigation keys to select a setting.
7. Use the up/down navigation keys to highlight √ and press OK.