Filter
Top Products
KK-XXX-03_INST_10-07
10
Item #9
Remove Bulkhead Emergency
Exit Hatches to ease installation.
Item #9
Route dome light wires, HVAC
hoses, video cables, etc to their
respective locations
Item #8
Place Passenger-
side Ceiling section into
vehicle
Do not attach any hardware at this time
Item #8
Position Middle Bulkhead to
separate front and rear
compartments
Current view of installation
Slide the ceiling sections out of the way in order to access A/C hoses, wires, etc.
Note: These components will be hard to access once ceiling is mounted.
Remove all slack from hoses to maximize airflow.
Item #7 & #8
Item #7 & #8
Item #12
Install forward compartment
driver sidewall / bench assembly.
Item 10.
Install forward compartment
ceiling assembly. Item 12.
Place rear facing bench against
front bulkhead. Item 16.
Item # 10
Item # 16