Filter
Top Products
Page 4SKU 66305 For technical questions, please call 1-800-444-3353.
the specic tool model. Use of an
accessory not intended for use with
the specic tool model, increases the
risk of injury to persons.
Service
Tool service must be performed a.
only by qualied repair personnel.
When servicing a tool, use only b.
identical replacement parts. Use
only authorized parts.
Use only the lubricants supplied c.
with the tool or specied by the
manufacturer.
SYMBOLS AND SPECIFIC
SAFETY INSTRUCTIONS
Symbol Denitions
Symbol Property or Statement
n
o
No-load speed
.../min
Revolutions or reciprocation per
minute
PSI
Pounds per square inch of pressure
ft-lb
Foot-pounds of torque
BPM
Blows per minute
CFM
Cubic Feet per Minute ow
SCFM
Cubic Feet per Minute ow at
standard conditions
NPT
National pipe thread, tapered
NPS
National pipe thread, straight
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
eye protection.
Chart continued in next column.
Symbol Denitions
WARNING marking concerning Risk
of Hearing Loss. Wear hearing
protection.
WARNING marking concerning Risk
of Respiratory Injury. Wear NIOSH-
approved dust mask/respirator.
WARNING marking concerning Risk
of Explosion.
Specic Safety Instructions
Strap Motorcycle to Lift before use.1.
The weight of the motorcycle must be 2.
centered directly over the Deck Plate
(16) during use.
This lift is designed for standard 3.
two-wheel motorcycles only. Do not
attempt to lift a motorcycle with side
car or a three-wheeled vehicle.
Do not exceed the maximum 1000 lb. 4.
weight capacity of this tool. Be aware
of dynamic loading! Dropping or
bouncing load may briey create ex-
cess load causing product failure.
Keep all fasteners and pull pins cor-5.
rectly installed and secure when the
Lift is in use.
Always use the Safety Bar (75) as 6.
described in this manual when the
Lift is raised. Never depend on the
Hydraulic Ram (24) alone to keep Lift
elevated.
Do not put Hands, arms, any body 7.
part or object within the interior frame
of the Lift when raising or lowering.
Do not hold onto the Lift as it is raised 8.
or lowered.