Filter
Top Products
Page 8SKU 47845 For technical questions, please call 1-800-444-3353.
Bearing Packing Instructions
Important
Read and adhere to the following instructions; failure to read and
obey all of the following instructions COMPLETELY will void the war-
ranty and can result in damage to the trailer, property damage, or SERI-
OUS PERSONAL INJURY.
Whenever a hub is disassembled (if a hub on a new unit requires
assembly or a hub is disassembled for maintenance), the following pro-
cedure MUST be followed.
1. Using a suitable solvent, thoroughly clean the bearings and the rest of
the parts in the Hub assembly of all grease, dirt, metal shavings, or any
other foreign object. The parts must be cleaned even if they are new
or
appear
clean.
2. Allow all pieces to dry completely.
3. Make sure that your hands are thoroughly clean and the bearing packer
(not included) is also thoroughly clean.
4. Place fresh, clean bearing grease in the packer.
5. With the grease-filled bearing packer in one hand and the bearing in the
other, press the bearing into the grease, forcing the grease inside the
slots in the bearing, continue doing this until every slot in the bearing is
completely full of grease.
6. Finish assembling the hub/wheel assembly as explained in the manual,
being careful not to get any dirt or debris on any part of the assembly.
SAVE THESE INSTRUCTIONS.