Filter
Top Products
Page 2SKU 47845 For technical questions, please call 1-800-444-3353.
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using or assembling tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Keep work area well lighted.
3. Keep children away. Children must never be allowed in the work area. Do not let them
handle the Trailer or tools during assembly.
4. Store idle equipment. When not in use, the Trailer must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right Trailer for the job. Do not attempt to force a small Trailer to do the work
of a larger industrial Trailer. There are certain applications for which this Trailer was
designed. It will do the job better and more safely at the rate for which it was intended.
Do not modify this Trailer and do not use this Trailer for a purpose for which it was not
intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7. Use eye protection. Always wear ANSI approved impact safety goggles during
assembly.
8. Do not overreach. Keep proper footing and balance at all times.
Maximum Load Capacity 1000 Lbs.
Bed Dimensions 51-1/2” L x 37-3/8” W (8 gauge)
Cross Member Dimensions 29-7/8” L x 6-5/8” W x 1-3/4” H (13 gauge)
Tow Bar Dimensions 50-3/4” L x 3-1/4” W x 2” H (12 gauge)
Axle Size 39” L (with spindle) x 1-1/2” W x 1-1/8” H (9 gauge)
Tires 12 PSI, 18 x 9.5-8 Tubeless Nylon (Not for highway use)
Hitch 6” L x 1-1/2” W x 1-3/8” H (6 gauge)