Filter
Top Products
SKU 167 For technical questions, please call 1-800-444-3353 PAGE 2
PRODUCT SPECIFICATIONS
yticapaCteviR
3
/
23
,"
1
/
8
,"
5
/
23
&,"
3
/
61
snipdezis"
erusserPriAgnitarepOISP09
noitpmusnoCriAISP09@MFC4
eziStelnIriA
1
/
4
TPN81-"
seziSeceipesoN
3
/
23
,"
1
/
8
,"
5
/
23
,"
3
/
61
"
snoisnemiDllarevO3xL"9xH"11
1
/
8
W"
thgieWteN3
7
/
8
sdnuoP
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure that all the parts and accessories listed on
page 11 are included, and the product is intact and undamaged. If any parts are missing or
broken, please call Harbor Freight Tools at the number shown on the cover of this manual
as soon as possible.
SAFETY WARNINGS AND PRECAUTIONS
1. WARNING! Use eye and hearing protection. Always wear ANSI approved
safety impact goggles, hearing protection, and heavy-duty work gloves when
using this Riveter. Other people in the work area must also wear appropriate
ANSI approved safety equipment.
2. Keep work area clean. Cluttered areas invite accidents.
3. Stay within air pressure capacity. Never operate the Riveter above 90 PSI.
4. Observe work area conditions. Keep work area well lit. Do not use pneumatic
tools in the presence of flammable gases or liquids.
5. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
6. Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
7. Use the right tool for the job. Do not attempt to force a small tool or attachment to
do the work of a larger industrial tool. There are certain applications for which this
tool was designed. It will do the job better and more safely at the rate for which it