Globalsat Technology BT-359 GPS Receiver User Manual


 
PAGE4OF13
BT359_GPS_v1.2.1
BT-359 GPS
1. GETTING STARTED
GlobalSat Bluetooth GPS receivers utilize a Bluetooth (short distance wireless protocol) and a built-in
active antenna for high signal tracking sensitivity. Based on the SiRF Star III Low Power chipset, our
GPS receivers support all functions (single sat updates in reduced visibility, superior urban canyon
performance, foliage lock for weak signal tracking, etc.). Our Bluetooth GPS receivers are well suited
for use with PDA’s, Smartphones, tablet PC’s and notebook PC’s and laptops which are already
Bluetooth enable. GPS receivers can be used in a wide variety of applications from in vehicle
navigation to and outdoor recreation and commercial applications.
2. THE BT-359
The BT-359W shown above and the BT359C (not shown) are models which can be found in North America, while
the BT-359S can also be found in Europe. There are no differences between these models with exception to the
cosmetic faceplate used. The “W” is a radio wave patter, the “C” is a glossy black faceplate, while the “S” has the
appearance of asolar cell graphic. Electronically they are thesame device.