Filter
Top Products
9
Universal Home Remote
(if equipped)
Program the Universal Home Remote
1. Determine which of the three chan-
nels (buttons) you want to program
for functions such as garage door
opener, gate opener or entry door
locks.
2. Press and hold the desired remote
button through step 3.
3. When the remote light blinks slowly
(within 30 seconds), hold your trans-
mitter/opener 1" to 3" from the remote
buttons. Then hold your transmitter
button on until the remote light flash-
es rapidly (up to 90 seconds). The
process is now complete.
Sunroof (if equipped)
To open and close the power sliding
sunroof, the ignition must be on or
Retained Accessory Power (RAP) must
be active. The sunroof button used to
operate the sunroof is located in the
front overhead console.
Express Vent:
• Press and release the rear side of the
Sunroof button to express vent the
glass panel.
Express Open:
• Once the sunroof is in the vent
position, press and release the rear
side of the Sunroof button to express
open the glass panel. Push up on the
sunshade and allow it to roll rear-
ward. This can be done before or
after the glass panel is opened.
Close:
• Press and hold the front side of the
Sunroof button to close the glass
panel. The sunshade must be pulled
forward manually.
See Section 2 of your Owner Manual.
• When using the wireless head-
phones, turn the headphones on and
adjust the volume using the volume
knob.
To stop or eject a DVD:
• To stop playing a DVD, press the
Stop button. Press the Play button to
resume viewing. If the Stop button is
pressed twice, the DVD will resume
viewing at the beginning.
• To eject a DVD, press the eject but-
ton on the DVD player.
See Section 3 of your Owner Manual.
See Section 2 of your Owner Manual.
Note: If your transmitter has a “rolling
code” feature, this process may not
work. Please refer to your Owner
Manual.