Filter
Top Products
3
GENERAC POWER SYSTEMS, INC.
RECOMMENDED SCHEDULED MAINTENANCE PROGRAM
SERVICE WORK TO BE PERFORMED BY FACTORY-TRAINED PERSONNEL ONLY.
DEALER INFORMATION
NAME: ____________________________________
ACCOUNT #: _______________________________
ADDRESS: _________________________________
PHONE: ___________________________________
TECHNICIAN: ______________________________
SIGNATURE: _______________________________
OWNER INFORMATION
NAME: ____________________________________
ADDRESS: _________________________________
SITE: _____________________________________
PHONE: ___________________________________
SIGNATURE: _______________________________
GENERATOR
MODEL NUMBER:___________________________
SERIAL NUMBER:___________________________
TRANSFER SWITCH
MODEL NUMBER:___________________________
SERIAL NUMBER:___________________________
HOUR METER READING at Completion of the Inspection:___________________________
WARNING!
To prevent injury, perform the following steps in the order indicated before starting any maintenance:
• Disable the generator set from starting and/or connecting to the load by setting the control panel
Auto-Off-Manual switch to the “OFF” position.
• Remove the control panel fuse.
• Turn off the battery charger.
• Remove the negative battery cable.
NOTE:
The battery charger must be turned off BEFORE removing the battery cable to prevent an over current
condition from burning out sensitive control panel components and circuits.
Following all maintenance, reverse these steps to insure the unit is returned to standby setup for normal
operation when required.
PURCHASE DATE: ____________________ START-UP DATE: ____________________
APPLICATION: ____ Standby Power ____ Prime Power ____ Rental/Trailerized
GENERATOR & TRANSFER SWITCH INFORMATION
!
!
3.0L GAS ENGINE SERVICE RECOMMENDATIONS