Filter
Top Products
Garmin © 2005 20 StreetPilot
®
i2/i3/i5 Owner’s Manual
APPENDIX
APPENDIX
Mounting to Your Windshield or Dashboard
You can mount your i2/i3/i5 to the windshield or the dashboard of your vehicle. To mount to your
windshield, see the Set Up and Go! instructions that came in your StreetPilot’s box. To mount to your
dashboard, use the mounting disk that came in the box. California drivers, mount the StreetPilot to your
dashboard to comply with California regulations. See the Product Information Sheet that came in the box
for more information.
IMPORTANT: The mounting disk sticks to your dashboard with permanent mounting
adhesive and is extremely difficult to remove after it is installed.
To mount to your dashboard:
1. Clean and dry the dashboard where you
want to mount the StreetPilot.
2. Locate the mounting disk that came in
the box. Remove the backing from the
permanent mounting adhesive on the
bottom of the disk and place the disk on
the dashboard.
3. Place the mount on top of the disk with the
lever up. Flip the lever down, as shown, to
secure the suction cup.
Disk
Suction
cup mount
Lever