Filter
Top Products
2 nüvi 5000 Owner’s Manual
GettinG Started
Step 1: Mount the nüvi
To mount the nüvi using the
suction cup mount:
1. Plug the vehicle power cable into
the power connector on the right
side of the cradle.
2. Clean and dry your windshield
with a lint-free cloth. Remove
the clear plastic from the suction
cup. Place the suction cup on the
windshield.
3. Flip the lever back, toward the
windshield.
4. Snap the cradle onto the suction
cup arm.
5. Fit the bottom of your nüvi into the
cradle.
6. Tilt the nüvi back until it snaps into
place.
7. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle. Your unit should turn
on automatically if it is plugged in
and the vehicle key is turned to
the ON/ACC position.
8. Ifyouareusingatrafcreceiver
inEurope,securethetrafc
receiver’s antenna to the
windshield using the suction cups.
To mount the nüvi using the
dashboard mount:
Use the enclosed mounting disk to
mount your unit to the dashboard and
comply with certain state regulations.
Cradle
Power cable
Suction cup mount