Filter
Top Products
26
To activate a route:
1. Press the PAGE button and switch to the ‘MENU’ Page.
Press the UP or DOWN Button and highlight ‘ROUTE’.
Press ENTER. The ‘ROUTE’ Page appears.
2. Press the UP or DOWN button and highlight
‘FOLLOW’ and press ENTER. The choices are the first
(beginning) waypoint and the last (end) waypoint.
3. Press the UP or DOWN button and select the desired
waypoint and press ENTER. The Pointer Page appears
giving you steering guidance to the destination
waypoint.
To remove a waypoint from the ‘ROUTE’ list:
1. Press the PAGE button and switch to the ‘MENU’ Page.
Press the UP or DOWN Button and highlight ‘ROUTE’.
Press ENTER. The ‘ROUTE’ Page appears. Press the UP
or DOWN button and highlight the waypoint you want
to remove. The ‘INSERT/REMOVE’ window appears.
Press the UP or DOWN button and highlight
‘REMOVE’. Press ENTER. The waypoint is removed
from the list.
To clear all route waypoints:
1. Press the PAGE button and switch to the ‘MENU’ Page.
Press the UP or DOWN button and highlight ‘ROUTE’.
Press ENTER. The ‘ROUTE’ Page appears.
2. Press the UP or DOWN button and highlight ‘CLEAR
ALL’ and press ENTER. The confirmation window
appears asking you if you really want to clear all of the
route waypoints. If you do, select ‘YES’. If you change
your mind, press the UP or DOWN button and select
‘NO’. Press ENTER. The waypoints remain in the route
list.
Routes
The eTrex draws an
electronic breadcrumb
trail as you travel.
The message ‘ARRIVING
DESTINATION’ is
displayed on every page
when you are 15 seconds
from reaching the
destination.
Reference