Filter
Top Products
19
Pointer Page Options
In addition to the Pointer Page basics that were covered
on page 12, the following Pointer Page options are
available:
• Reset Max Speed: this resets the Maximum Speed
achieved during a trip.
• Reset Trip: the trip time, trip distance (odometer) and
average speed are reset to zeros.
• Stop Navigation: stops any active navigation.
To select a Pointer Page Option:
1. Press the ENTER button on the Pointer Page.
2. The Options Menu appears. Press the UP or DOWN
button, highlight the desired option, and press
ENTER. Once you press ENTER, the change is made
and the Options Menu disappears.
You can also change the fields at the bottom of the
Pointer Page to display different data:
Speed—like the speedometer in your car, ‘SPEED’ tells
you how fast you are going regardless of whether or not
you are on the right track.
Average Speed—the average speed traveled since last trip
reset.
Max Speed—the maximum speed traveled since last reset.
Heading—the direction you are traveling.
Bearing—the compass direction between your location
and destination.
Elevation—the measurement of height above mean sea
level.
Location—shows your current latitude and longitude.
Sunrise—the time of sunrise at your present location.
The Pointer Page allows
you to display eleven
types of different data,
such as ‘Elevation’.
Pointer Page
Options
The eTrex will tell you
the time of sunrise and
sunset at your
destination.
Reference