Filter
Top Products
17
To change the Map Datum:
1. From the MENU Page press the UP or DOWN button to highlight ‘UNITS’. Press the OK
button to display the UNITS Page.
2. Press the UP or DOWN button to highlight the ‘MAP DATUM’ fi eld and press the OK
button.
3. Press the UP or DOWN button to highlight the desired datum and press the OK button.
4. Press the PAGE button to return to the MENU page.
Units of Measure
The Geko 101 allows you to select statute (the default setting), nautical, or metric units
of measure for all speed and distance readouts.
To change the Units of Measure:
1. From the MENU Page press the UP or DOWN button to highlight the ‘UNITS’ fi eld and
then press the OK button to display the UNITS Page.
2. Press the UP or DOWN button to select ‘UNITS’ fi eld and press the OK button.
3. Press the UP or DOWN button to highlight the specifi c unit and press the OK button.
4. Press the PAGE button to return to the MENU page.
Menu Page
You can select statute, nautical,
or metric units of measurement
from the UNITS page.
The ‘DEFAULTS’ setting
will reset the Geko 101
units to all of its factory
settings.
Units Page
190-00297-00_0C.indd 17 10/1/2003, 12:59:14 PM