Filter
Top Products
13
Using the Project waypoint feature, the Geko 101 can create a waypoint at a specifi ed
distance and bearing using an existing waypoint as a reference. You can also change the
waypoint name, symbol and elevation on this page.
Projecting a waypoint:
1. Select a waypoint from the list on the WAYPOINTS Page and press the OK button to
display the REVIEW WAYPOINT Page.
2. Use the UP or DOWN button to highlight the ‘PROJECT’ fi eld and press the OK button
to display the PROJECT WAYPOINT Page which shows the numeric name assigned to
the new waypoint and with the distance fi eld highlighted.
3. Press the OK button to display the EDIT NUMBER Page.
4. Press the DOWN button to move to the next number in the fi eld. Select the digit you
wish to change and press the OK button to display the drop-down number list.
5. Press the UP or DOWN button to highlight the correct number and press the OK
button. When all numbers are entered correctly, highlight ‘OK’ and press the OK button.
6. Use the DOWN button to highlight the bearing fi eld and press the OK button to display
the EDIT ANGLE Page.
7. Press the DOWN button to highlight the next number in the fi eld. Select the digit you
wish to change and press the OK button to display the drop-down number list.
8. Use the UP or DOWN button to highlight the correct number and press the OK button.
When all numbers are entered correctly, highlight ‘OK’ and press the OK button.
The name, symbol and elevation can be changed on this page as well.
9. When all changes have been made, highlight ‘OK’ and press the OK button to save the
waypoint.
10. Highlight ‘GOTO’ and press the OK button to begin direct navigation to the waypoint.
Menu Page
Review Waypoint Page
The ‘PROJECT
WAYPOINT’ option
The ‘EDIT NUMBER’ option
190-00297-00_0C.indd 13 10/1/2003, 12:59:12 PM