Filter
Top Products
17
Part Two: Section 2
XM Weather
light “Show Map Pointer?” and then press
ENT.
3. Turn the large or small right knob to move
the Map Pointer to highlight an airport with a
METAR flag.
4. Press ENT to display the METAR text. With
“Done?” highlighted, press ENT to return to
the map view.
To view any airport’s Textual METAR page:
1. If not viewing the WPT page group, press CLR
and turn the large right knob to select the
WPT page group.
2. Turn the small right knob until the Textual
METAR page appears.
3. To select another airport, press the small right
(CRSR) knob to highlight the airport ID (in the
“APT” field).
4. Turn the small and large right knobs to edit
the airport identifier for the desired airport.
Then, press ENT to confirm the airport name.
5. Press the small right (CRSR) knob again to
remove the cursor (that is, to stop highlighting
the APT field).
190-00356-30 Rev C