Filter
Top Products
4-3190-11110-00 Rev. G
Garmin GDL 39 Portable ADS-B and GPS Receiver User’s Guide
Light Behavior Description
Power Solid Green Power is on
Bluetooth Solid Blue Bluetooth connection is active
Bluetooth Blinking Blue Manual Bluetooth Searching Mode
Table 4-1 GDL 39 Status LEDs
The photosensor adjusts the status light intensity based on ambient lighting.
4.2 Bluetooth Setup
1. When the GDL 39 is powered on, the GDL 39 will go into pairing mode.
Follow the directions for the device intended to connect to the GDL 39.
2. The blue LED will be constant when the device is connected. Bluetooth setup
only needs to be run for the first time pairing with a device. You may need to
select the GDL 39 from the list of Bluetooth devices in your display device.
Multiple Bluetooth devices may be connected with the GDL 39.
NOTE:
If having issues making a Bluetooth connection hold the power button
down for 5 seconds. The blue LED will begin blinking. Release the power
button and then press the Power button again for 5 seconds. Power cycle
the GDL 39 and retry making a Bluetooth connection.