Filter
Top Products
StreetPilot 2720 Owner’s Manual 23
APPENDIX
Switching Between Providers
If you have more than one service provider, you can let the 2720
use the best provider for your area, or you can manually select
a provider. The 2720 uses the selected provider until you select
Auto again or a different provider.
➋
Touch Traffic Receiver.
➊
Touch Traffic.
➌
Touch Providers.
➍
Select a provider
or touch Auto.
Custom POIs (Points of Interest)
Your StreetPilot 2720 will accept custom points of interest (POI)
databases, available from various companies on the Internet.
Some custom POI databases contain alert information for points
such as safety cameras and school zones. Your 2720 can notify
you when you approach one of these points.
After downloading your POI database, use the Garmin POI
Loader to install the POIs into your unit. The POI Loader is
available at http://www.garmin.com/products/sp2720. Select
Updates and Downloads. Refer to the POI Loader Help File for
more information; press F1 to open the help file.
CAUTION: Garmin is not responsible for the consequences
of using a custom POI database or the accuracy of the safety
camera or other custom POI database.
Adjusting the Proximity Alerts
To turn on or off the proximity alerts, press the MENU key >
Settings > General > Proximity Alerts.